Depending on your subnet mask you can use any IP in the range of 10.0.0.0 - 10.255.255.255. However, 0 and 255 is usually reserved for the network and broadcast address respectively. Matt Liotta President & CEO Montara Software, Inc. http://www.montarasoftware.com/ 888-408-0900 x901 > -----Original Message----- > From: thelist-admin at lists.evolt.org [mailto:thelist-admin at lists.evolt.org] > On Behalf Of Chris W. Parker > Sent: Thursday, October 31, 2002 7:57 PM > To: thelist at lists.evolt.org > Subject: internal ip schemes (was RE: [thelist] IIS5: subdomains, how to > configure) > > > -----Original Message----- > > > From: .jeff [mailto:jeff at members.evolt.org] > > one really easy fix is to bind multiple ip addresses to the > > network card. then, set dev.mydomain.com to use it's own ip > > address. on the main tab for the properties dialog for this > > iis entry, click the advanced button and make sure to change > > the ip address dropdown to the ip you wish to use. also, > > check to make sure there's a host header entry for > > dev.mydomain.com as well. just for shits and giggles, make > > sure the other iis entry has host header entries for > > mydomain.com and www.mydomain.com. > > thanks jeff! using a second ip address worked like a charm. > > i couldn't think of any ip addresses the were open in the 10.0.0.x range > so instead i pulled a number out of my butt which happened to be > 10.0.1.0. to my suprise this worked out fine. so now i have a different > question. can i use any number from 0 to 255 in place of the x in > 10.x.x.x ? > > for example... > > would 10.0->255.0->255.0->255 work just fine (except for 10.0.0.0 > right?)? when would i need to change the subnet mask, if ever? > > > thanks, > chris. > -- > For unsubscribe and other options, including > the Tip Harvester and archive of thelist go to: > http://lists.evolt.org Workers of the Web, evolt !