No an adaptor. watch for wrap <http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&category=31531&item=672105171 2#ebayphotohosting> You need to put the laptop drive on the secondary channel on the standard PC ide cable. Be sure that it is set as a slave drive, and the primary (PC) is set as the master. If it is a newer motherboard, and the PC drive is newer, it may be set to the CS(cable select position) which has the Bios figuring it out and passing this off to the OS. Setting it as master/slave is the quickest way of getting access to your data. the head lemur Interviews: http://www.lemurzone.com/pixelview/ blog: http://theheadlemur.typepad.com/ Community: http://www.evolt.org